Dishwasher Belt Don t Let It Slip
Below is a MRR and PLR article in category Home Family -> subcategory Home Improvement.
Keep Your Dishwasher Running Smoothly: Check the Belt
If you have an older dishwasher that's been reliable, but now it's giving you trouble, the issue might be a slipping belt. If your dishwasher suddenly stops filling or draining, or works intermittently, it's time to inspect the belt.
The belt connects the motor to the pump via pulleys. When the motor spins in one direction, the dishwasher fills; when it spins the other way, it drains. A broken belt means no action, while a stretched belt can cause inconsistent operation.
The belt is about 25 inches long and made of clear or black rubber, located behind the lower access panel (or kickplate). Luckily, you don't need to pull the dishwasher out from the wall to access it. All you need is a screwdriver.
Safety First:
Always disconnect the power before starting any repairs. Unplug the dishwasher, remove the fuse, or flip the circuit breaker. Once the power is disconnected, you’re good to go.
To access the belt:
1. Open the dishwasher door to locate and remove the access panel screws.
2. Close the door and remove the panel.
3. You'll notice the old belt is slightly stretched, making it easy to remove from the pulleys.
Installing a new belt:
1. Loop one end of the new belt around the pump housing, directly above the pump pulley.
2. Place the other end over the motor pulley.
3. Carefully roll the belt down the pump housing until it fits snugly in place.
Finally, reattach the access panel and restore power. Your trusty dishwasher should be back in action, ready to serve you once more.
You can find the original non-AI version of this article here: Dishwasher Belt Don t Let It Slip.
You can browse and read all the articles for free. If you want to use them and get PLR and MRR rights, you need to buy the pack. Learn more about this pack of over 100 000 MRR and PLR articles.