Making the BSNL DataOne Wireless Home Network Guide

MRR and PLR Articles Pack

Below is a MRR and PLR article in category Computers Technology -> subcategory Communications.

AI Generated Image

How to Set Up a BSNL DataOne Wireless Home Network


Overview

This guide will walk you through setting up a Wi-Fi network with BSNL DataOne. While many routers claim simple setup, the process can be tricky, especially with specific configurations like using a NetGear router with a HUAWEI SmartAX 880 modem. Follow these detailed steps to connect your BSNL DataOne broadband wirelessly.

What You Need

1. BSNL DataOne 256Kbps connection
2. HUAWEI SmartAX MT880 modem (provided by BSNL)
3. NetGear WGR614v5 wireless router

Steps for Configuration

This process involves two main steps: configuring the modem for PPPoE and setting up the NetGear router.

Step 1: Modem Configuration


1. Set Up Your Modem
Connect the RJ11 cable to the ADSL port and the RJ45 cable to your computer's Ethernet port.

2. Change IP Settings
Configure your Ethernet card with these IP properties:
- IP Address: 192.168.1.2
- Subnet Mask: 255.255.255.0
- Gateway: 192.168.1.1

3. Access the Modem Configuration Tool
Open a browser and go to [192.168.1.1](http://192.168.1.1). Log in with:
- Username: `admin`
- Password: `admin`

4. Configure WAN Settings
- PVC Number: PVC 0
- WAN Type: PPP
- Connection Type: PPPoE
- VPI/VCI: 0 / 35
- Default Route: Enabled
- Use DNS: Enabled
- Max Idle Time: Always On
- Enter your ISP Username and Password

5. Apply Changes and Restart
Save your settings, allowing the modem to restart.

6. Connect to the Internet
Return to [192.168.1.1](http://192.168.1.1) and click the plug icon to establish a connection. The status should turn green upon success.

7. Test Your Connection
Navigate to the "Tools" section, type a website like `www.msn.com`, and ping it to check connectivity.

8. Configure LAN Settings
- IP Address: 192.168.1.90
- Subnet Mask: 255.255.255.0

Restart the modem again.

9. Update Ethernet Card IP Properties
- IP Address: 192.168.1.2
- Default Gateway: 192.168.1.90
- Preferred DNS: 61.1.96.69
- Alternate DNS: 61.1.96.71

10. Verify Connection
Open a browser and visit any website to ensure you’re online.

Step 2: Router Configuration


1. Connect the Router
Attach the NetGear wireless router to your computer.

2. Enable DHCP on Network Card
- Obtain IP and DNS addresses automatically.

3. Access Router Configuration
Go to [192.168.1.1](http://192.168.1.1/basicsetting.htm) and log in with:
- Username: `admin`
- Password: `password`

4. Configure Wireless Settings
- SSID: Your network name
- Region: Asia
- Channel: 11
- Mode: g and b
- Security: WEP
- Passphrase: Your passphrase
- Generate and record Key1

5. Apply and Restart the Router
Save your settings and restart.

6. Configure Basic Settings
- Internet Login: No
- Static IP Address: 192.168.1.91
- Subnet Mask: 255.255.255.0
- Gateway IP: 192.168.1.90
- Use these DNS Servers:
- Primary: 61.1.96.69
- Secondary: 61.1.96.71

7. Final Setup
Connect the ADSL modem to a non-designated Internet port on the router.

Additional Tips

- Never connect the ADSL line to the designated Internet port, use one of the four other ports instead.
- Stick with 192.168.x.x for IPs to avoid conflicts.
- If you encounter issues, use the reset button on the modem/router.
- Ensure WPA security is enabled to protect your network.

Enjoy your wireless network! Feel free to leave comments if you have further questions.

You can find the original non-AI version of this article here: Making the BSNL DataOne Wireless Home Network Guide.

You can browse and read all the articles for free. If you want to use them and get PLR and MRR rights, you need to buy the pack. Learn more about this pack of over 100 000 MRR and PLR articles.

“MRR and PLR Article Pack Is Ready For You To Have Your Very Own Article Selling Business. All articles in this pack come with MRR (Master Resale Rights) and PLR (Private Label Rights). Learn more about this pack of over 100 000 MRR and PLR articles.”